Troubleshoot Canon Printer Error b200 On Your Own: Effective Methods To Resolve

Canon printer error b200 generally indicates that the printhead of the printer has died. This is one of the most common errors which can take place at any time whenever you are trying to use your Canon printer. 

Though this error generally occurs due to some glitch present in the print head, you can also encounter this issue due to a glitched or outdated printer driver. 

Now, if you are looking for solutions to resolve this issue, then you have dropped on the right page. This article is a complete guide to resolve the error b200 on your Canon printer. So, let’s begin with the troubleshooting procedure with the help of which you can eliminate this error.

Fixes for Canon Printer Error b200

Mentioned below are some effective steps and procedure, using which you will be able to overcome this error in a hassle-free manner. On that note, try to follow the methods whichever is applicable to your printer as the steps will be different as per the printer version you are using. 

In Case of 4+ Cartridge Canon Printers

If you are using 4+ Cartridge Canon Printers, then you can follow these steps to resolve this error. 

Step 1: 

Initially, when you are getting this error, the first thing which you can do is to open the top cover of the printer. 

Now, you will find that the cartridge cradle will lift up automatically. After that, you need to remove all the cartridges from the cradle.

Step 2: 

After completing the previous step, you need to remove the printhead by lifting up the lever situated beside the cartridge cradle. 

Remove the printhead from the printer after lifting the lever. 

Step 3: 

Now, after reinserting the printhead into its position, lock the lever.

Step 4:

Now, take the cartridges, reinsert them into their correct positions in the printer and make sure that there is no open door. 

Now, the printer has access to the cartridges and printheads and thus it is ready. 

Step 5: 

Now, you need to unplug the printer cord from the electricity board. Leave it like that for at least 5 minutes. 

This will cool down the printer and will eliminate the lingering electrical energy.

Step 6: 

Now, you need to replug the printer and perform an extensive nozzle check or start a cleaning cycle. 

The Canon printer error code b200 will not generate when the printer has the correct access to the printhead. 

So, after following these steps, hopefully, the error b200 will be resolved on your Canon printer.

Troubleshooting 2 Cartridge Canon Printers

In case, you are using 2 Cartridge Canon Printers, then you need to follow the steps below to overcome the b200 error from your device. 

Step 1:

When you encounter this error on your printer, the first thing which you can do is to turn off the printer. Now, you will find that the cartridge cradle will be stuck in the Error B200 state. 

Step 2:

Now, you need to turn on the printer again. Though the Error B200 does not exactly indicate the cartridge error, however, you can overcome this error by changing the glitched cartridge. 

Step 3:

So now, you need to remove the cartridge gently from the slot. 

Step 4:

Now, you need to perform an extensive nozzle check or you need to perform a cleaning cycle. 

Step 5:

In case, you see this error persists, you can replace the other cartridge with a new one. As this printer works with 2 cartridges, so, it is obvious that one of the cartridges is faulty. 

Try to replace and check both of the cartridges one by one. Hopefully, it will resolve this error. 

In case, you notice this error persists after performing all of the steps, then you can directly contact an expert to resolve this error. 

After going through this article, and implementing the steps as given, you will be able to resolve this Canon printer error b200, without any hassle. As the maintenance process of the printer is not much easy, you can contact an expert if you require.